Inside the main body of the tire pressure gauge is a highly airtight piston, moving within a very smooth-walled tube. The piston is located at one end of the tube, while a plug sits at the other. A compression spring connects the piston and the plug, serving to push the piston toward the left side of the tube.
When the gauge is pressed onto the valve stem, pressurized air from the tire rushes into the gauge, pushing the piston to the right. The distance the piston travels corresponds to the tire pressure; the pressurized air pushes the piston right, while the spring pushes it back to the left. When the gauge is removed from the valve stem, the flow of pressurized air stops, and the spring immediately returns the piston to the left. The left end of the gauge features a recessed, ball-shaped fitting designed to connect with the tire's valve stem. Looking into this opening reveals a rubber seal and a small, fixed pin. The rubber seal presses against the rim of the valve stem to prevent air leaks during measurement, while the fixed pin depresses the valve core, allowing air to enter the gauge. Air flows around the pin, passes through the recessed section of the fitting, and enters the piston chamber.
Inside the tube, a calibration rod is used to display the pressure reading. This rod sits above the piston but is not attached to it; instead, it is connected to the plug. As the piston moves to the right, it pushes the calibration rod along with it. When the pressure is released, the piston returns to the left, but the calibration rod remains at its point of maximum displacement, allowing the pressure reading to be observed.
