Many car owners know that they need to check tire pressure regularly, but when they get the air pressure gauge, they don't know how to read the value correctly. In fact, as long as you master a few key steps, you can easily complete tire pressure testing. The following are specific operation methods and precautions:
1. Operation steps
• Cold car measurement: The vehicle needs to be parked on flat ground and the tires should be measured when they are cool (at least 3 hours after parking). At this time, the gas temperature inside the tires is stable and the measurement results will be more accurate.
• Connect the valve. Remove the valve cover, align the measuring end of the air pressure gauge vertically with the tire valve and tighten it. If you hear a "hissing" exhaust sound, the contact is in place. At this time, the air pressure gauge starts to work.
• Read the value - Pointer type: Look at the position of the dial pointer (the black unit on the outer ring is Bar, the red inner ring is PSI), and the value needs to be compared with the vehicle's standard tire pressure.
• Digital: Press the activation button to light up the screen for direct display. Some models will automatically save data.
• Alarm type: red light/sound indicates abnormal tire pressure and needs to be adjusted in time.
2. Tire pressure standard reference: The normal tire pressure range for family cars is 2.3-2.5Bar, and for SUVs/light trucks is 2.5-3.0Bar. For specific standards, you can check the door B-pillar, the inside of the fuel tank cap or the vehicle manual. Different models may differ.
3. Precautions
• The hot tire measurement needs to be subtracted by 0.2Bar, because the increase in tire temperature after driving will cause the tire pressure to increase, and the measurement result will be higher at this time.
• Check the tire pressure at least once a month to ensure that the tires are in normal condition and avoid safety hazards caused by insufficient or excessive tire pressure.
• It is recommended to fine-tune ±0.1Bar in different seasons. It can be slightly lower by 0.1Bar in summer and slightly higher by 0.1Bar in winter to adapt to the impact of temperature changes on tire pressure.
To use the tire pressure gauge correctly, you need to pay attention to cold car measurement, align the valve, and read in time. The conventional tire pressure range for cars is 2.3-2.5Bar. For specific standards, it is recommended to check the official logo on the door B-pillar or fuel tank cap. It is recommended to develop a good habit of monthly inspections and adjust tire pressure according to the season to ensure driving safety.

